We are Surefix
Most parts of a building can hide small mistakes. Gutters can’t. When they fail, they stain façades, overflow during storms and send water straight where it shouldn’t go. That’s why the roofline demands a fixing system that installs cleanly, aligns accurately and stays secure for the long term.
Surefix was designed around that exact requirement: a modern rise & fall gutter bracket system that delivers faster installation, stronger fixing and safer working practices across new builds, renovations and precision-led construction. And because half-round profiles remain the most widely specified guttering system in the UK, the entire Surefix range is engineered to support them with absolute consistency.
This page covers the bracket range, compatible systems, finishes and installation approaches so you can specify and order with confidence.
The Surefix system is available in two core rise & fall bracket types, designed to suit different build stages while delivering the same performance standards.
For projects requiring enhanced fall control and specialist alignment.
The adjustable model is designed for situations where gutter fall must be set with absolute accuracy. Using a controlled drill–plug–wind installation method, it provides secure mechanical fixing post-brickwork without hammering, resin or compromise.
It is ideal for:
Non-standard rooflines
Premium façades
Renovations and retrofit work
Modular and lightweight systems
A reinforced threaded fixing delivers high shear strength, while the 70mm elongated adjustment slot allows precise alignment without disturbing the masonry.
For projects where the fixing needs to be integrated into the structure.
The built-in model is installed by bricklayers during construction. It is placed onto the mortar bed and built over with the next course of brick, forming a permanent mechanical bond within the wall.
Mortar embedment holes allow the masonry to lock through the bracket, providing long-term strength without impact or forced fixing. A 70mm elongated slot allows controlled rise-and-fall adjustment once the roofline is set, without moving the bracket or compromising the structure.
This makes it ideal for:
New-build housing
Clean, consistent rooflines
Estate-wide developments
Projects where long-term stability is critical
A proven innovation, rigorously tested and now protected across the UK and Europe
Walk past any new estate, any renovation, or any long-term public building, and you’ll see the same familiar shape running along the roofline. There’s a reason half-round systems remain the go-to choice.
They deliver exactly what buildings need:
Reliable water movement
The curved shape moves rainwater quickly and efficiently, reducing blockages and pooling.
Consistent performance
Half-round geometry keeps water flowing evenly, even during sudden heavy downpours — something becoming more common across the UK.
Simple installation
Straightforward brackets, predictable alignment, and no overcomplicated shapes to fight with.
Versatility across materials
Whether the gutter is uPVC, aluminium, steel, or cast iron, the shape performs the same way. Installers like it. Maintainers like it. Developers trust it.
Fits almost every façade
From brick to stone to modular cladding, half-round profiles look at home on everything from historic buildings to new modular homes.
Most importantly, the predictable shape means installers get the fall right, the alignment stays true, and the final run looks as clean as the drawings promised. Surefix takes that reliability and doubles down on it.
The curve of half-round gutters is a known quantity, which allows the Surefix system to deliver a level of accuracy traditional hammered stakes never could. When the bracket is fixed using the appropriate Surefix installation method, you know exactly where the gutter will sit and how the fall will behave.
That consistency is essential for:
• Long roof elevations
• Estate-wide developments
• High-exposure areas
• Renovations where existing brickwork is fragile
• Modular buildings with tight tolerances
• Heritage sites where masonry cannot be damaged
Half-round systems have always worked. The Surefix bracket system makes them work better.
Half-round gutters come in multiple materials, each chosen for different reasons — cost, durability, aesthetics, or heritage requirements. Surefix brackets support them all with the same reliability.
Lightweight, affordable, and used across most housing developments.
Surefix provides a stable anchor point that eliminates movement caused by expansion, contraction, or loose stake fixings.
Chosen for its clean, modern look and long lifespan.
Aluminium demands brackets that offer precise alignment. Surefix delivers that consistency without risking damage to the building.
Traditional, heavy, and long-lasting.
Cast-iron half-round systems require a bracket that won’t loosen or cause masonry fractures. Surefix provides a firm fixing point without relying on hammering or force.
Strong, rigid, and ideal for more demanding environments.
Steel guttering needs brackets that can handle load and vibration. Surefix keeps the line straight and secure through all seasons.
A controlled, mechanical installation replaces impact and guesswork. No shocks to the masonry, no cracked bricks, no ruined elevations.
The bracket stays where it’s fixed. The fall doesn’t drift. The line doesn’t sag.
Every bracket sits the same way. Every elevation matches the one before it.
Installers finish the job faster. Developers reduce snagging. Maintenance teams get easy access.
It’s the difference between wrestling with outdated tools and using equipment designed for modern construction standards.
A half-round gutter can only perform properly when the fall is consistent from end to end. If the fall is too shallow, water lingers and builds up. If it’s too steep, the system becomes noisy, inefficient, and visually uneven.
The Surefix system removes those problems at the source by providing precise, controlled adjustment along the whole elevation. Whether using the built-in rise-and-fall bracket or the adjustable model, each position can be fine-tuned accurately, correcting for uneven or irregular brickwork and matching the fall exactly to the design requirements of the building.
Long runs stay aligned, the roofline keeps its visual straightness, and adjustment happens within the slot rather than by forcing the bracket in the masonry. Even as the building settles and weather patterns change, the bracket holds its position and maintains long-term performance. In short, you get the fall you planned for, not the fall the masonry dictated.
Surefix brackets are available in black and white, allowing the fixing to visually disappear into the roofline and complement the guttering and façade. Both finishes are designed to sit quietly in the background while delivering long-term durability across a wide range of building types.
The black finish is a popular choice for black uPVC systems, aluminium gutters, cast-iron effect profiles, darker rooflines and contemporary developments where a discreet, low-contrast detail is required. It blends neatly with the gutter run and maintains a clean, professional appearance even after years of exposure.
The white finish is suited to lighter façades, white uPVC rooflines, rural and coastal properties, and developments built around brighter architectural lines. It delivers a crisp, uniform look without the mismatched tones often seen where untreated or poorly coated metal fixings are used.
Whichever colour is specified, all Surefix brackets are protected by durable exterior-grade coatings designed to resist UV fading, corrosion, salt exposure, freeze–thaw movement, pollution and general surface degradation. This ensures the bracket continues to perform as intended and retains its appearance long after traditional systems have rusted, shifted or begun to stain the surrounding masonry.
Maintenance is often where traditional stake-fixed gutter systems cause the most frustration. Removing a hammered stake can damage brickwork, widen fixing holes, weaken the elevation or simply refuse to come free without tearing the surrounding masonry apart.
Surefix removes that problem at source. The bracket can be removed cleanly whenever access is required and reinstalled without damaging the façade or compromising the fixing point. Strength, alignment and holding performance are maintained after reinstallation.
This makes routine work predictable and non-destructive, whether the task is repairing a gutter section, repainting or rendering an elevation, replacing a length of guttering, upgrading a cup, clearing blockages or carrying out phased works on an occupied building.
With Surefix, maintenance becomes a controlled, repeatable part of the building’s lifecycle rather than a source of damage or uncertainty.
Surefix isn’t a speculative system. It is already installed across new-build housing developments, renovations, public buildings, commercial units, modular and off-site construction projects, agricultural structures, heritage properties and long-term asset portfolios where consistency and reliability matter.
It has been adopted because it reflects the realities of modern construction, not the outdated habits the industry tolerated for decades. Installers value the speed and accuracy. Developers value the consistency across plots. Maintenance teams value the clean access and reusable fixings.
Homeowners notice something else entirely: the system simply works, year after year, without drawing attention to itself.
Fill out the form below, and we will be in touch shortly to run though your order. No card details will be asked for via this form.